So your program isn't working? [Picture Guide]

[Water]

~PICTURE GUIDE~

So you have tried everything to get a program to run, but nothing is working, and you're getting frustrated. :(

Step 1
Make sure the program has downloaded correctly and you have extracted all of the files.

[Only registered and activated users can see links]

Once you have extracted the file, open the folder, then the program.
[Only registered and activated users can see links]


If you see an error, pjrChameleon.ocx or another component with .ocx.

Step 2

Go here ([Only registered and activated users can see links]) download
pjrChameleon.ocx
COMDLG32.ocx
MSINET.ocx
MSWINSCK.ocx
RIGHTX32.ocx
TABCTL32.ocx
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]

Step 3

Now that you have all your required files, check your DOWNLOADS folder.

[Only registered and activated users can see links]

Move the .ocx file into the local disk folder

[Only registered and activated users can see links]

Open the windows folder, select the .ocx file and move it into the WINDOWS folder

[Only registered and activated users can see links]

Copy the .ocx file and paste it into System32 and SysWOW64

[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]

Now that all
pjrChameleon.ocx
COMDLG32.ocx
MSINET.ocx
MSWINSCK.ocx
RIGHTX32.ocx
TABCTL32.ocx
files are in both System32 and SysWOW64 folder.

When the program requires pjrChameleon, you are best off copying the ocx. file into the folder of the program.
[Only registered and activated users can see links]
[Only registered and activated users can see links]

Step 4

Go to Start, type in Run

[Only registered and activated users can see links]

Once Run is up use these to register the .ocx files.
regsvr32 "%systemroot%\System32\msinet.ocx"
regsvr32 "%systemroot%\System32\mswinsck.ocx"
regsvr32 "%systemroot%\System32\tabctl32.ocx"
regsvr32 "%systemroot%\System32\comdlg32.ocx"
regsvr32 "%systemroot%\System32\richtx32.ocx"

[Only registered and activated users can see links]

Hopefully this will pop up.

[Only registered and activated users can see links]

Step 5

Run the program as Administrator

[Only registered and activated users can see links]

The program should run fine now :$

[Only registered and activated users can see links]

Hopefully this will help anyone who is stuck with getting these programs to run! Good luck!

Also if it requires anything else, and it gives you the file name, you can install the file from the ocx. website, and follow these steps! :$